CORROSION RESISTANT COATING



Flexshield - Special Corrosion Resistant Coating

4 mils of protection on both sides of the panel !

This means both inside and outside of the building panels are protected.

Vinyl Plastisol coating is flexible, corrosion-resistant and attractive. The high solids content in Flexshield means that it can be applied as a heavy film and then heat-fused to form a durable, continuous coating.

Industrial Roofing and Siding

 
Labor cost to install building panels with Flexshield is the same as shorter life span panels with standard coatings.

Attention Flexshield is available:
4 mils to 8 mils thick.

Why not use Flexospan's Flexshield coating on your industrial roofing and siding to extend the life of your sheeting so you don't have to pay for the same project every few years.

When you need the most protection....

Flexshield industrial roofing and siding protective coating is formulated to stand up to the harsh industrial pollutants that quickly destroy other coatings and panels. Flexshield is a 4 mil thick coat of tough corrosion resistant vinyl plastisol

Flexshield is an ideal coating for:

  • Steel Mills
  • Waste Water Treatment Plants
  • Paper Mills
  • Chemical Processing Plants
  • Fertilizer Plants
  •  Foundries and Foundry Facilities
  • Coal Mine Facilities
  • Coal Mine Conveyor Covers
  • Power Plants

Through the years a Flexshield coating on your industrial steel panels can reduce production downtime and reduce total installation cost.

Remember the goal is to reduce
Life cycle cost:

  • Flexshield coated steel panels will last longer.
  • Most maintenance projects require some production downtime.

 

Please call Flexospan today. Our trained staff can help find the best Flexospan Industrial Products for your facility.

800-245-0396

Please tell our sales agent that you're interested in our Flexshield Protective Coating.
 


Flexshield Coating

Our . . .

Choose it when . . .

It's available on . .

Flexshield, our standard, vinyl plastisol coating is flexible, corrosion-resistant and attractive.

The high solids content (80% - 90%) and the absence of highly volatile solvents in Flexshield means that it can be applied as a heavy film and then heat-fused to form a durable, continuous coating. It's applied in two coats. The first is a special polymer primer, which enhances bonding. Then, a 4-mil to 8-mil-thick top coat is roll coated to both the interior and exterior surfaces.

Our vinyl plastisol received an outstanding rating in the Kesternich Cabinet test, the industry-accepted test of environmental, atmospheric, and acid rain pollutants. Its uncommon flexibility will protect your panels, yet remain intact during rolling and fabrication. In tests of color change, chalking resistance, formability, humidity, abrasion and salt spray, it equals or surpasses competitive coatings.
 

You need the most protection for your building. Flexshield is formulated to stand up to the harsh industrial pollutants that quickly destroy standard coatings. An ideal coating for steel mills, waste water treatment plants, paper mills, chemical processing plants, and fertilizer plants and, it's an investment that pays off in the extended life of your buildings.

Whether a corrosive atmosphere is generated from interior or exterior sources, you have extra protection. Contact Flexospan for more information or for help in determining the proper thickness of finish for your specific project.

  • G-90 galvanized
  • Galvalume®
  • 3003 aluminum
  • Painted aluminum is available as a special order, subject to quantity requirements.